PRODUCTS

Brand

LMD-1951MD

19-inch SXGA 2D LCD medical monitor
Request a quote

Full 10-bit HD / SD colour reproduction

The 19-inch LMD-1951MD SXGA medical LCD monitor is designed for both SD (Standard Definition) and HD (High Definition) systems that generate 4:3 aspect ratio signal output. The LMD-1951MD incorporates many of the same characteristics and features as the LMD-2451MD, including ChromaTRU™ colour processing for excellent picture reproduction, a full 10-bit digital signal processor to produce accurate and lifelike images, and enhanced viewing modes such as Picture-in-Picture and Mirror Image. 

ENVIRONMENTALLY-FRIENDLY FEATURES

Advanced LED backlight technology enables the LMD-1951MD to reproduce brighter images than previous models, while at the same time being environmentally-friendly, Hg-free and offering lower power consumption.

  • Excellent picture reproduction
For the highest level of colour reproduction accuracy, the LMD-1951MD uses ChromaTRU™ colour processing technology, for outstanding colour consistency. The monitor also offers highly bright high-contrast images thanks to LED backlight technology along with a high-quality SXGA LCD panel.

  • Natural gradation and accurate colour reproduction
The LMD-1951MD adopts an advanced full 10-bit digital video signal processor to produce accurate and lifelike images with smooth and natural gradation.

  • Wide range of standard input interfaces
The LMD-1951MD is equipped with a full range of inputs, including composite, Y/C (S-Video), RGB, HD15 and DVI-D as standard. Furthermore, two built-in option ports greatly expand the input signals this monitor can accept. These ports allow users to easily select and change input/output signals for ultimate flexibility via a variety of available option boards, including 3G-SDI input (with the BKM-250TG option board).

  • Design features for hygiene and safety
The LMD-1951MD is liquids resistant and designed to be easily wiped clean of liquids and gels, ensuring effective hygiene and safety in the medical environment. It also features rounded corners, which is beneficial in a busy and space-limited environment such as an operating room.

  • Safety listing and compliance
The LMD-1951MD is UL60601-1-listed and complies with CSA C22.2 No.601-1 and EN 60601-1 safety standards, making it suitable for use in a wide range of professional medical applications.

  • Variety of scan and display modes
There are various image scan modes – such as Normal/Over scan, Under scan, Full, Zoom and Native – allowing users to select the most suitable scan mode depending on the requirements. Furthermore, the LMD-1951MD provides a variety of display modes including Mirror Image, Side-by-Side and Picture-in-Picture, which allow users to optimally view images according to each particular application.

  • Variety of gamma curve settings
Users can choose from a variety of gamma settings – 1.8, 2.0, 2.2, 2.4, 2.6, and DICOM – depending on their requirements.

  • Key-inhibit
Users can activate/deactivate control panel buttons with just one touch. Use of this feature helps prevent inadvertent operation of the control panel in a busy environment. When the menu item KEY-INHIBIT is set to ON, control panel buttons cannot be used – this prevents unauthorised alteration of settings.

  • VESA mounting
The monitor can stand on a desktop or be mounted on the wall or ceiling with a 100 x 100mm VESA arm mount.

 

Picture Performance

 

Panel

a-Si TFT Active Matrix LCD

Picture size (diagonal)

481.84 mm (19.0 inches)

Effective Picture size (H x V)

Approx. 376 × 301 mm (14 7/8 × 11 7/8 inches)

Resolution (H x V)

1280 x 1024 pixels (SXGA)

Aspect

5:4

Pixel efficiency

99.99%

Colors

Approx.16.7 million colors

Viewing angle (panel specification)

89°/89°/89°/89° (typical) (up/down/left/right contrast > 10:1)

 

Input

 

Composite input (NTSC/PAL) connector

BNC type (×1), 1 Vp-p ± 3 dB sync negative

Y/C input connector

4-pin mini-DIN (×1)
Y: 1 Vp-p ± 3 dB sync negative
C: 0.286 Vp-p ± 3 dB (NTSC burstsignal level)
0.3 Vp-p ± 3 dB (PAL burst signal level)

RGB/component input connectors

BNC type (×3)
RGB: 0.7 Vp-p ± 3 dB (Sync On Green, 0.3 Vp-p sync negative)
Component: 0.7 Vp-p ± 3 dB (75% chrominance standard color bar signal)

External synchronized input connector

BNC type (×1)
0.3 Vp-p to 4.0 Vp-p ± bipolarity ternary or negative polarity binary

HD15 input connector

D-sub 15-pin (x1),
R/G/B: 0.7 Vp-p sync positive (Sync On Green, 0.3 Vp-p sync negative)
Sync: TTL level (polarity free, H/V separate sync)
Plug & Play function: corresponds to DDC2B

DVI input connector

DVI-D (x1) TMDS single link

Parallel remote

Modular connector 8-pin (×1)

Serial remote (LAN)

D-sub 9-pin (RS-232C) (×1)
RJ-45 modular connector (ETHERNET) (×1)

Optional input port

2 ports
Signal format:
H: 15 kHz to 45 kHz
V: 48 Hz to 60 Hz

DC IN connector

DC5V/24V (output impedance 0.05 ohms or less)

 

Output

 

Composite output connector

BNC type (×1)
Loop-through, with 75 ohms automatic terminal function

Y/C output connector

4-pin mini-DIN (×1)
Loop-through, with 75 ohms automatic terminal function

RGB/component output connectors

BNC type (×3)
Loop-through, with 75 ohms automatic terminal function

External synchronized output connector

BNC type (×3)
Loop-through, with 75 ohms automatic terminal function

 

General

 

Power

LCD monitor (LMD-1951MD)
AC 100-240 V, 50/60 Hz, 0.92 A-0.40 A
DC IN: 24 V 3.5 A 5 V 0.030 A (Supplied from AC adaptor)
AC Adaptor (Sony, AC-110MD) (optional)
AC IN: 100 V-240 V, 50/60 Hz, 1.53 A-0.58 A
DC OUT: 24 V 5.0 A 5 V 0.060 A

Power consumption

Maximum: approx. 85 W (when two BKM-229X are installed)

Operating conditions

Temperature

0 °C to 35 °C (32 °F to 95 °F)

Recommended temperature

20 °C to 30 °C (68 °F to 86 °F)

Humidity

30% to 85% (no condensation)

Pressure

700 hPa to 1060 hPa

Storage and transport temperature

–20 °C to +60 °C (–4 °F to +140 °F)

Storage and transport humidity

0% to 90% (no condensation allowed)

Storage and transport pressure

700 hPa to 1060 hPa

Dimensions (W x H x D)

455.8 x 368.3 x 101.7 mm (18 x 14 5/8 x 4 1/8 inches) (without a stand)
455.8 x 435.7 x 302 mm (18 x 17 1/4 x 12 inches) (with SU-560 optional stand)

Mass

6.7 kg (14 lb 12 oz) (when the optional stand and the input adaptor are not installed)
7.1 kg (15 lb 10 oz) (when the optional stand is not installed and two BKM-229X are installed)

Accessories supplied

AC power cord (1), AC plug holder (2), Instructions for Use (1), CD-ROM (1), Using the CD-ROM
Manual (1), Quick Reference(1), When you First Use the Monitor (1), Sales Companies Guide (1)

 

Optional Accessories

 

BKM-220D

SDI 4:2:2 Input Adaptor

BKM-243HS

HD/D1-SDI input adaptor

BKM-227W

NTSC/PAL input adaptor

BKM-229X

Analog component input adaptor

BKM-250TG

3G/HD/SD-SDI input adaptor

BKM-256DD

DVI-D input adaptor

AC-110MD

AC adaptor

SU-560

Monitor stand

 

Download Product catalogue

©2017 Integrated Imaging Technologies Trading , All rights reserved. Designed and developed by web design Dubai, Hermosoft.